• HIOKI PW3336 Power Meter

HIOKI PW3336 Power Meter

• Compatible with the SPECpower® benchmark for server power consumption
• SPECpower® is a registered trademark of Standard Performance Evaluation Corporation
• Measure DC and single-phase 2-wire to 3-phase 3-wire with 2-channel input
Model : HIOKI PW3336

Measurement lines

Single-phase 2-wires, single-phase 3-wires, 3-phase 3-wires, (voltage / current measurement range set for each wiring mode)

Measurement items

Voltage, Current, Active power, Apparent power, Reactive power, Power factor, Phase angle, Frequency, Efficiency, Current integration, Active power integration, Integrated time, Voltage waveform peak value, Current waveform peak value, Voltage crest factor, Current crest factor, Time average current, Time average active power, Voltage ripple factor, Current ripple factor

Harmonic parameters

Synchronization frequency range: 10 Hz to 640 Hz, Analysis order up to 50th

Harmonic voltage RMS value, Harmonic current RMS value, Harmonic active power, Total harmonic voltage distortion, Total harmonic current distortion, Voltage fundamental waveform, Current fundamental waveform, Active power fundamental waveform, Apparent power fundamental waveform, Reactive power fundamental waveform, Power factor fundamental waveform (displacement power factor), Voltage current phase difference fundamental waveform, Interchannel voltage fundamental wave phase difference, Interchannel current fundamental wave phase difference, Harmonic voltage content % , Harmonic current content % , Harmonic active power content %

(The following parameters can be downloaded as data during PC communication but not displayed: Harmonic voltage phase angle, Harmonic current phase angle, Harmonic voltage current phase difference)

Measurement range

Voltage : AC/DC 15 V to 1000 V, 7 ranges

Current : AC/DC 200 mA to 50 A, 8 ranges

Power : 3.0000 W to 100.00 kW (Depends on combination of voltage and current range)

Integration measurement (Integration time up to 10,000 hours)

[Current] No.of displayed digits: 6 digits (from 0.00000 mAh, Polarity-independent integration and Sum value)

[Active power] No.of displayed digits: 6 digits (from 0.00000 mWh, Polarity-independent integration and Sum value)

Input resistance (50/60 Hz)

[Voltage] 2 MΩ, [Current] 1 mΩ or less (direct input)

Basic accuracy (Active power)

±0.1% rdg. ±0.1% f.s. (DC)

±0.1% rdg. ±0.05% f.s. (45 Hz to 66 Hz, at Input < 50% f.s.)

±0.15% rdg. (45 Hz to 66 Hz, at 50% f.s. Input)

Display refresh rate

5 times/s to 20 seconds (depend on average times settings)

Frequency characteristics

DC, 0.1 Hz to 100 kHz

D/A output (-02/-03 model only)

16 channels (selectable from following items), Level output DC ±2 V, Waveform output 1 V f.s.

Level output, instantaneous waveform output (voltage, current, active power)

Level output (apparent power, reactive power, power factor, or other)

High-speed active power level output

Functions

[Rectification method] AC+DC, AC+DC Umn, AC, DC, FND, Auto-range, Average, VT or CT ratio settings, Synchronized control, MAX/MIN, or other functions

Interfaces

RS-232C / LAN standard, (-01/-03 model also includes GP-IB)

Power supply

100 to 240 V AC, 50/60 Hz, 40 VA max.

Dimensions and mass

305 mm (12.01 in) W × 132 mm (5.20 in) H × 256 mm (10.08 in) D, 5.2 kg (183.4 oz)

Accessories

Instruction manual ×1, Measurement guide ×1, Power cord ×1

   Compatible with the SPECpower® benchmark for server power consumption

   SPECpower® is a registered trademark of Standard Performance Evaluation Corporation

   Measure DC and single-phase 2-wire to 3-phase 3-wire with 2-channel input

   For development and production of motors, inverters, power conditioners, power supplies, and other devices

   High-precision basic accuracy of ±0.1 % (*1)

   (*1) For complete details, please refer to the specifications

   Wide frequency bandwidth of 0.1 Hz to 100 kHz or DC

   High-current measurement up to 65 A of direct input

   Harmonic measurement up to the 50th order according to IEC 61000-4-7

   High-accuracy measurement, even with a low power factor for no-load testing of transformers and motors

   Built-in external sensor input terminals to measure up to 5000 A AC

   Synchronize up to 8 units for multi-unit measurement

Related Products

HIOKI 3193-10 Power Meter

HIOKI 3193-10 Power Meter

HIOKI PQ3198 Power Quality Analyzer

HIOKI PQ3198 Power Quality Analyzer

HIOKI PW9100 AC/DC Current Box

HIOKI PW9100 AC/DC Current Box

HIOKI PW3335 Power Meter

HIOKI PW3335 Power Meter

HIOKI PW3390 Power Analyzer

HIOKI PW3390 Power Analyzer

HIOKI 3333 Power Meter

HIOKI 3333 Power Meter