Frequency bandwidth

DC to 50 MHz (-3 dB)

Rise time

7.0 ns or shorter

Delay time (Typical)

30 A range: 12 ns, 5 A range: 12 ns, 0.5 A range: 13 ns

(Delay time relative to rising waveform of input signal 1 ns)

Noise level

75 μA rms max (at 0.5 A range, using 20 MHz band measuring instrument)

Max. rated current

30 A range: 30 A rms, 5 A range: 5 A rms, 0.5 A range: 0.5 A rms

(DC, and sine wave, requires derating at frequency)

Max. allowable peak current

30 A range: ±50 A peak (within the input limit time 2 s)

5 A range: ± 7.5 A peak,

0.5 A range: ± 0.75 A peak (< 10 MHz), ±0.3 A peak (≥ 10 MHz)

Amplitude accuracy

30 A range: ±3.0% rdg. ±1 mV, (Typical) ±1.0% rdg. ±1 mV (≤ 10 Arms, DC, 45 to 66 Hz sine wave, within the maximum peak current of each range)

5 A range: ±3.0% rdg. ±1 mV, (Typical) ±1.0% rdg. ±1 mV (DC, 45 to 66 Hz sine wave, within the maximum peak current of each range)

0.5 A range: ±3.0% rdg. ±10 mV, (Typical) ±1.0% rdg. ±10 mV (DC, 45 to 66 Hz sine wave, within the maximum peak current of each range)

Output rate

30 A range: 0.1 V/A, 5 A range: 1 V/A, 0.5 A range: 10 V/A, (The output of this probe is internally terminated, so connect to voltage input equipment with high input impedance such as 1MΩ)

Measurable conductors

φ 5 mm (0.20 in), Insulated conductor

Power supply

Supplied from Power Supply 3269, Probe Power Unit Z5021

Cable length

Sensor cable (between relay box and sensor): 1.5 m (4.92 ft)

Power cable: 1.0 m (3.28 ft) (Power plug: FFA.0S.304.CLAC37Y / LEMO inc.)

Dimensions and mass

Sensor: 155 mm (6.10 in)W × 18 mm (0.71 in)H × 26 mm (1.02 in)D, Relay box section: 45 mm (1.77 in)W × 120 mm (4.72 in)H × 25 mm (0.98 in)D

Terminator section: 29 mm (1.14 in)W × 83 mm (3.27 in)H × 40 mm (1.57 in)D mm, 370 g (13.1 oz)

Accessories

Instruction manual ×1, Carrying case ×1