HIOKI SW1002 Switch Mainframe
• SW1002: max. 264 channels (2-wire) to max. 72 channels (4-terminal pair)
• Circuit-design-friendly for impedance measurements that minimize errors between channels (Effect: 0.01% f.s.*)
|
Slots |
12 slots |
|
Supported modules |
MULTIPLEXER MODULE SW9001 (2-wire/4-wire) MULTIPLEXER MODULE SW9002 (4-terminal pair) |
|
Connectible instruments |
Max. 2 units 2-wire × 1 + 4-wire × 1, or 2-wire × 1 + 4-terminal pair × 1 |
|
Max. input voltage |
60 V DC (Cannot connect to battery packs in excess of 60 V DC), 30 V AC rms, 42.4 V peak, Maximum rated voltage to ground: 60 V DC |
|
Communication I/F |
LAN, USB, RS-232C (for host, for measurement instruments) |
|
Functions |
Channel switching, wiring method, scan function, communication command transmission, channel delay, shield switching |
|
Power supply |
100 to 240 V AC / 30 VA (50/60 Hz) |
|
Dimensions and mass |
430 mm (16.93 in) W × 132 mm (5.20 in) H × 420 mm (16.54 in) D, 6.0 kg (211.6 oz) |
|
Accessories |
Power cord ×1, instruction manual ×1, usage precautions ×1, USB driver CD ×1 |
• Switch between voltmeter and battery tester while testing
• SW1002: max. 264 channels (2-wire) to max. 72 channels (4-terminal pair)
• Circuit-design-friendly for impedance measurements that minimize errors between channels (Effect: 0.01% f.s.*)
*For BT4560 100 mΩ range, R measurements, and a measurement frequency of 1 kHz
• For OCV measurement, internal resistance measurement, and external potential measurement of battery cells
• Measure battery modules up to 60 V DC
