Specialized functions for heat flow measurement

■ Easy scaling settings：directly enter the sensitivity of the heat flow sensor

■ Calculations：waveform processing function for the analysis of temperature and heat flow (Simple average, moving average, integration, heat transmission coefficient), Integration with numerical calculations

Analog inputs

[No. of channels] 10 isolated analog channels using scanning input method (M3 mm dia. screw terminal block)

[Voltage measurement range] ±10 mV to ±60 V, 1-5V, Max. resolution 500 nV

[Temperature : thermocouples] −200 ˚C to 1800 ˚C (depending on sensor), thermocouples (K, J, E, T, N, R, S, B), Max. resolution 0.1 ˚C

[Humidity] not available

[Max. allowable input] 60 V DC

[Max. rated voltage between input channels] [Max. rated voltage to earth]

30 AC Vrms, 60 V DC (max. voltage between input channel terminals, and from terminals to chassis ground without damage)

Pulse inputs

[No. of channels] 4 pulse input channels (requires CONNECTION CABLE 9641, all pulse inputs share common ground with the main unit)

[Totalized pulses] 0 to 1000M (count) (No-voltage ‘a’ contact, open collector or voltage input), Max. resolution 1 pulse

[Rotation count] 0 to 5000/n (r/s), Resolution 1/n (r/s) * n = pulses per rotation (1 to 1,000)

[Max. allowable input] 0 to 10 V DC

[Max. rated voltage between input channels] [Max. rated voltage to earth] Non-isolated

Recording intervals

10 ms to 1 hour, 19 selections (All input channels are scanned at high speed during every recording interval)

Selectable filters

50 Hz, 60 Hz, or OFF (digital filtering of high frequencies on analog channels)

Memory capacity

Internal storage: 3.5 M-words, External storage: CF card or USB memory stick (only the HIOKI CF cards are guaranteed for correct operation)

External interface

USB 2.0 mini-B receptacle ×1; Functions: Control from a PC, Transfers files from the installed CF card to a PC (cannot transfer files from the connected USB memory stick to a PC via USB communication), Data copy between CF card and USB memory stick

Display

4.3-inch WQVGA-TFT color LCD (480 × 272 dots)

Functions

Save data to the CF Card or USB memory stick in real time, Numerical Calculations, etc.

Power supply

AC Adapter Z1005: 100 to 240 VAC (50/60 Hz), 30 VA Max. (including AC adapter), 10 VA Max. (main unit only)

Battery Pack 9780: Continuous use 2.5 hours (@25°C/77°F), 3 VA Max.

External power source: 10 to 16 V, 10 VA Max. (please contact HIOKI distributor for cable; less than 3 m/9.84 ft cable length)

Dimensions and mass

176 mm (6.93 in) W × 101 mm (3.98 in) H × 41 mm (1.61 in) D, 550 g (19.4 oz) (Battery Pack 9780 not installed)

Accessories

Measurement Guide ×1, CD-R (Instruction manual PDF, Logger Utility Instruction Manual PDF, Data acquisition application program Logger Utility) ×1, USB cable ×1, AC Adapter Z1005 ×1