HIOKI CT6700 / CT6701 Current Probe
• High S/N characteristic ideal for ultra low 1 mA order current waveforms
• Connect directly to an oscilloscope’s BNC input terminal *1
|
Frequency bandwidth |
DC to 50 MHz (-3 dB) |
|
Rise time |
7.0 ns or shorter |
|
Noise level |
60 μA rms typical, 75 μA rms max (for 30 MHz band measuring instrument) |
|
Continuous allowable input |
5 A rms (DC, and sine wave, requires derating at frequency) |
|
Max. allowable peak input |
±7.5 A peak (non-continuous) |
|
Amplitude accuracy |
Typ.: ±1% rdg. ±1 mV (DC, 45 to 66 Hz sine wave, 0 to 5 A rms) Guaranteed: ±3% rdg. ±1 mV (DC, 45 to 66 Hz sine wave, 0 to 5 A rms) |
|
Output rate |
1 V/A (The output of this probe is internally terminated, so connect to voltage input equipment with high input impedance such as 1MΩ) |
|
Measurable conductors |
Insulated conductor |
|
Core diameter |
φ 5 mm (0.20 in) |
|
Power supply |
±12 V ±0.5 V, 3.2 VA |
|
Dimensions and mass |
Sensor: 155 mm (6.10 in)W × 18 mm (0.71 in)H × 26 mm (1.02 in)D, Terminator: 29 mm (1.14 in)W × 83 mm (3.27 in)H × 40 mm (1.57 in)D mm, Mass: 250 g (8.8 oz), Sensor cable BNC terminal: 1.5 m (4.92 ft), Power cable: 1 m (3.28 ft), Power plug: FFA.0S.304.CLAC37Y / LEMO inc. |
|
Accessories |
Instruction manual ×1, Carrying case ×1 |
• Wide band: [CT6700] DC to 50 MHz (-3 dB), [CT6701] DC to 120 MHz (-3 dB)
• High S/N characteristic ideal for ultra low 1 mA order current waveforms
• Connect directly to an oscilloscope’s BNC input terminal *1
*1 Connecting the device’s metal BNC terminal to a Memory HiCorder’s plastic BNC terminal may damage the plastic terminal or cause it to become misshapen.
