MCT FRAME is a crimping tool frame for mobile tool die sets. Easily interchangeable crimp dies are kept together with a special pin to simplify handling. A wide range of crimp dies enables the user to cover all applications in just one tool frame.

KWB-4099 is a crimping tool for non-insulated connectors, 4-10 mm²/AWG 12-8, W-Crimp.

KTV-6810 is a crimping tool for CATV connectors, 8.23 mm, 9.70 mm, 6.65 mm/.262'', .324'', .381'', HEX-Crimp.

KTB-1025 is a crimping tool for non-insulated coppertube connectors, 10 - 25 mm²/AWG 8-4, HEXCrimp. For connectors to DIN 46235.

KSA-0760 is a crimping tool for insulated connectors, 0.75 - 6.0 mm²/AWG 22-10 (red, blue, yellow), Oval- Crimp symmetric. Short and long handle available.

KSA-0725S is a crimping tool for insulated connectors, 0.75 - 2.5 mm²/AWG 22-14 (red, blue), Oval-Crimp.

KRS-1560L-4 is a crimping tool for Solar connectors like MC4™ and similar connectors, Ø 4 mm/.157", with openbarrel conductor crimp 1.5 - 2.5, 4.0, 6.0 mm²/AWG 16 - 14, 12, 10. This tool also exist in versions for MC3™ and SOLARLOK™ connectors. (MC3™ and MC4™ are trademarks owned by Multi- Holding AG, Switzerland. SOLARLOK™ is a trademark owned by TE Connectivity, USA)

KRF-1025S is a crimping tool for right angeled uninsulated connectors, 1.0 - 2.5 mm²/AWG 18 - 14, B/F-Crimp.

KRB-0560 is a crimping tool for non-insulated connectors 6.3 mm, 0.5 - 6 mm²/.250", AWG 22-10, B/FCrimp. Short and long handle available.

KRB-0115S is a crimping tool for non-insulated open barrel connectors, 2.8 + 4.8 mm, 0.1 - 1.5 mm²/.110" + .187", AWG 26-16, B/F-Crimp.

KPB-6099L is a crimping tool for Turned pin connectors, 4.0 - 10 mm²/AWG 12-8, Square-Crimp, with locator.

KPB-0140L is a crimping tool for Turned pin connectors, 0.14 - 4.0 mm²/AWG 26-12, Square-Crimp, with locator.